Appendix E: Using the Adaptec Flash Utility ● 118
4 Select Select an Operation.
5 Choose the operation you want, then follow the on-screen
instructions to complete the task:
● Update—Updates all the flash components on a RAID controller
with the flash image data from the UFI file.
● Save—Reads the contents of a RAID controller’s flash
components and saves the data to a UFI file, which you can use to
restore a RAID controller’s flash if required.
● Ve r i f y —Reads the contents of a RAID controller’s flash
components and compares it to the contents of the specified UFI
file.
● Ve r s i o n —Displays version information about a RAID
controller’s flash components.
● List—Lists all supported RAID controllers detected on your
system.
6 Complete the flash operation and restart your computer before
trying to use the RAID controller again. (
You can not use your RAID
controller while you are
updating its flash.)
To Next Page
Loading...
