ADB 2500 - Program Your ADB Remote; Remote Setup for ADB

To Next Page

To Previous Page

Program Your ADB Remote

Remote Setup for ADB – Automatic Search for TV Code

Follow these steps to have the ADB remote perform an automatic search

for your TV code.

Step 1:

Switch on your TV. Then press the TV button on the ADB remote.

Step 2:

Press and hold the RCU SETUP button until the TV key blinks twice.

Step 3:

On the ADB remote, press 9-9-1. The TV key should blink twice.

Step 4:

Aim the ADB remote at your TV and press the POWER button on the ADB

remote.

Step 5:

Press the CH+ or CH- button repeatedly until your TV turns off.

Step 6:

Press the POWER button on the ADB remote to turn your TV back on.

Step 7:

Press the RCU SETUP button to store the code for your TV. The TV key

will blink twice. The ADB remote is now programmed for your TV.

Note: To setup other devices (example: DVD players), replace DVD

anywhere in the above section that mentions TV.

ADB 2500 - Program Your ADB Remote; Remote Setup for ADB - Automatic Search for TV Code