Click “Go online to HealthVault
™
” and sign into your account.a)
Click the box of the user you would like to associate with thisb)
device and click “Allow Access.”
Then, click “Upload Now.” Your readings will then upload fromc)
your device to the HealthVault
™
service.
You can then click “View Data in HealthVault
™
” to see your readings.d)
Once you have approved a device, you will not need to perform thesee)
actions again. You can just connect your device and start with step H.
For more information on how to use HealthVault™, click “Help” at the top
right-hand corner of the page. There, you will find a detailed help
document as well as an FAQ section to help with any issues you may
have.
NOTE:
You cannot run the PC Link software and HealthVault
™
at the same•
time. Be sure to completely remove the PC Link software before
installing HealthVault
™
.
HealthVault
™
has a mobile app available in both the Apple
®
App•
Store and Microsoft
®
Windows
®
Phone marketplace.
NOTE: The Morning/Evening Hypertension function is only available on the
unit. No Morning/Evening averages will be transmitted to a computer. Only
the individual readings in memory will be transmitted.
8. IRREGULAR HEARTBEAT DETECTOR
This function indicates an allorhythmic heartbeat. If the IHD symbol
appears on the display that means that certain abnormalities in
heartbeat frequency were detected during the measurement. In this
case, the result may deviate from your normal blood pressure – repeat
the measurement. In most cases, this is no cause for concern.
However, if the symbol appears on a regular basis (e.g. several
times a week with measurements taken daily) we advise you to tell
your doctor. Please show your doctor the following explanation:
23
6
0
2
2
N
6
0
2
3
N
M
o
d
e
l
s
O
n
l
y
To Next Page
Loading...
