ADC M-80p - AD-80 I; M-80 P Specifications

10 American Dryer Corp. WFR113539 -13
MAXIMUM CAPACITY (DRY WEIGHT) 80 lb
36.28 kg
TUMBLER DIAMETER 37”
93.98 cm
TUMBLER DEPTH 35-7/16”
90.01 cm
TUMBLER VOLUME 22.05 cu ft
624.39 L
TUMBLER / DRIVE MOTOR 1 hp
0.74 kW
BLOWER / FAN MOTOR* 3/4 hp
0.56 kW
CABINET WIDTH 39”
99.06 cm
CABINET DEPTH 52-3/8”
133.03 cm
CABINET HEIGHT 77-7 /8”
197.80 cm
DOOR OPENING (DIAMETER) 31-3 /8”
79.69 cm
DOOR SILL HEIGHT 29”
73.66 cm
WATER CONNECTION 3/4”-11.5 NH
(North America)
3/4” B.S.P.T. (Outside North America)
DRYERS PER 20’/40’ CONTAINER 8 / 16
DRYERS PER 48’/53’ TRUCK 22 / 26
AIRBORNE SOUND LEVEL 6 4 d B (A )
VOLTAGE AVAILABLE 120-480V 1,3ø 2,3w 50/60 Hz
APPROXIMATE NET WEIGHT 700 lb
317.52 kg
APPROXIMATE SHIPPING WEIGHT 720 lb
326.59 kg
AIRFLOW
50 Hz
880 cfm
24.91 cmm
60 Hz
920 cfm
26.05 cmm
HEAT INPUT 135,000 Btu/hr
34,019 kcal/hr
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
INLET PIPE CONNECTION 1/2” N.P.T.
(Male)
1/2” B.S.P.T. (Female) (CE and Australia Only)
VOLTAGE AVAILABLE 208-480V 1,3ø 2,3w 50/60 Hz
APPROXIMATE NET WEIGHT 710 lb
322.05 kg
APPROXIMATE SHIPPING WEIGHT 730 lb
331.12 kg
AIRFLOW
50 Hz
770 cfm
21.80 cmm
60 Hz
740 cfm
20.95 cmm
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
OVEN SIZE
kW Btu/hr
kcal/hr
18.5 63,125
15,907
20.4 69,608
17,541
22 75,067
18,917
VOLTAGE AVAILABLE 120-480V 1,3ø 2,3w 50/60 Hz
APPROXIMATE NET WEIGHT 830 lb
376.48 kg
APPROXIMATE SHIPPING WEIGHT 865 lb
392.36 kg
AIRFLOW
50 Hz
854 cfm
24.18 cmm
60 Hz
1,025 cfm
29.02 cmm
STEAM CONSUMPTION (MAX) 14 0 lb /hr
63.50 kg/hr
OPERATING STEAM PRESSURE (MAX) 150 psi
10.34 bar
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
BOILER HORSEPOWER (NORMAL LOAD) 3.6 Bhp
SUPPLY CONNECTION (1) 3/4” N.P.T.
(Female)
RETURN CONNECTIONS (2 ) 3 /4” N.P.T. (Male)
AD-80i / M-80p Specifications _____________________________________________________
NOTE: The manufacturer reserves the right to make changes in specifications at any time without notice or obligation.
GAS
STEAM
Shaded areas are stated in metric equivalents 5/15/18
* Blower / fan motor for single phase steam is 1 hp (0.75 kW). Blower / fan motor for 3-phase, all heat, is 1 hp (0.75 kW).
ELECTRIC