34 American Dryer Corp. WFR113539-13
When contacting ADC, the information on the rating plate is
required to ensure proper service/parts assistance. The rating
plate is located on the upper left side panel of the dryer, behind
the control panel.
1. Model Number – This describes the style of dryer and type
of heat (gas, electric, or steam).
2. Serial Number – Allows the manufacturer to gather
information on your particular dryer.
3. Type of Heat – This describes the type of heat for your
particular dryer, gas (either natural gas or propane gas),
electric, or steam.
4. Heat Input (For Gas Dryers) – This describes the heat
input in British thermal units per hour (Btu/hr) or kilowatts
(kW).
5. Orifice Size (For Gas Dryers) – Gives the number drill size
used.
6. Electric Service – This describes the voltage and current
rating for a particular model.
7. Gas Manifold Pressure (For Gas Dryers) – This describes
the manifold pressure taken at the gas valve tap.
CE Plate
Rating Plate Information ______________
Standard Plate
AGA Label
To Next Page
Loading...
