Additel ADT681A - 2 Display and Operation; Main Display

12
2. Display and Operation
2.1 Main Display
Main display as shown in Figure 5:
◆
Status bar: Including battery, USB status, pressure reading rate HS (high speed), FILT, ABS,BluetoothREC, and
button lock. When the battery icon is blank and flashing, Bluetooth will be turned off automatically. When the battery power
is too low, it will prompt the low battery to automatically turn off and will start to countdown to turn off the gauge
automatically.
◆
Unit area
：
including kPa
,
Pa
,
mbar
,
bar
,
MPa
,
mmHg
,
inHg
,
psi
,
mmH2O
,
inH2O
,
ozf/in2
and
kgf/cm2, varies by pressure
ranges, “user” means custom unit;
◆
Identifier area: Including icons for menu, ATM, Alarm (when the pressure value overranges, this icon and main
display will flash for prompt), Tare, leak test
△
P
/
Max
/
Min, clock, temperature unit, AM, PM, and percentage;
◆
Main display area: Display pressure values and edit items;
◆
Sub display area: Display a multi-digit value, time information or the title of setup menu;
◆
Percentage pressure indicating area:Displays the pressure percentage on the perimeter of the fan-shape display.
The triangle icon indicates the position of the pressure percentage.