14
2.2 Main Operation Interface
After the pressure gauge is turned on, it first displays the interface of the original range of the pressure module. 3
seconds later, it will enter the main display immediately. The main display is divided into: status bar, pressure unit display
area, identifier area,main display area, and sub display area, as shown in Figure 6.
Figure 6Main Operation Interface
1. Status Bar: Including battery, USB status, pressure reading rate, filter status, absolute pressure; Bluetooth, data log
and button lock;
2. Unit
：
Pressure unit, press Unit button to switch;
3. Identifier area: Including Atm. Alarm. Tare.
△
P. Max. Min. clock. AM. PM.
℃
.
℉
. %. It indicates the display item of
sub display area;
4. Main display area: Display pressure values
；
To Next Page
Loading...
