Additel ADT681A - Bluetooth Auto-Off Settings; Serial Settings; Operation Error Codes

40
3.7.2 Bluetooth Auto-off Settings
The title bar displays 6-2, and the main display area displays bLEAUt. Short press Enterbutton to enable or disable
the Bluetooth auto-off function. Once it is enabled, Bluetooth will automatically turn off after one hour of disconnection.
3.7.3 Serial Settings
Address settings: The title bar displays 6-3, and the main display area displays Add. Short press Enterbutton to edit. It
supports 1~112.
Baud rate settings: The title bar displays 6-4, and the main display area displays bAUd. Short press Enterbutton to
edit. It supports 4800,9600,19200 and 38400, the default baud rate is 9600.
3.8 Operation Error Codes
When performing function operations or information editing on the screen, the pressure gauge will prompt in the form
of error codes as the screen cannot display detailed text.
Table 7Operation Error Codes List
Error codes
Description
Solutions
001
Password wrong
Check the password
002
Parameter beyond the range
The entered value is beyond the gauge’s
range, enter a new value
003
Operation execution failed
Try it again