15
5. Sub display area: Display atmospheric pressure, tare value,leak test, maximum and minimum pressure, time,
temperature, and pressure percentage. Long press Unit button to switch between them.
2.3 Buttons
Power button: Short press to unlock the buttons.Long press to power on/off the gauge;
Log button: Short press: in main display, go to data log menu; in other menus, it functions as “return.”Long press:
go to Setup from main display;
Unit button:Short press: in main display, switch pressure units; in other menus, move to right. Long press: view
parameters in main display, sub display will switch content to be viewed;
Backlight button: Short press: in main display, backlight on/off; other menus, move downward. Long press: view
peak value in main display;
Zero button: Short press: in main display, pressure zero; other menusis “Confirm.”Long press: Bluetooth on/off
in main display.
2.4 Pressure Measurement
When the gauge is in the main display, it will show the current pressure unit and real-time pressure value in unit area
and main display area. And it will show the pressure percentage around the sub display area.
2.4.1 Pressure Percentage Indication
The pressure gauge displays the pressure percentage on the perimeter of the fan-shape display area after entering
the main display, and the percentage is indicated by triangle icon. As shown in Figure 7, it has triangle icon and ten grids.
To Next Page
Loading...
