Additel ADT681A - Resolution; Auto-Backlight Time Settings; Auto Power off Settings; Filter

29
10
━
1(10readings /1sec) 3
━
1L(3readings /1sec) 2
━
1 L(2readings /1sec) 1
━
1 L(1reading /1sec)
1
━
2 L(1reading /2sec) 1
━
3 L(1reading /3sec) 1
━
4 L(1reading /4sec) 1
━
5 L(1reading /5sec) 1
━
6 L(1reading
/6sec) 1
━
7 L(1reading/7sec) 1
━
8 L(1reading /8sec) 1
━
9 L(1reading /9sec) 1
━
10 L(1reading /10sec)
With a L indicates that the gauge is in low power consumption mode, and without L indicates that the gauge is in
normal working mode.
When the sampling rate is set to10readings /1sec, it means high sampling rate, with an indication of HS in status bar.
3.1.3 Resolution
The title bar displays 1-3, the main display area displays bit. Short press Enter button to edit the resolution. It supports
5 digits and 6 digits.
3.1.4 Auto-Backlight Time Settings
The title bar displays 1-4, and main display area shows LEd. Short press Enter button to edit the auto-backlight turn
off time. It supports 15 seconds, 30 seconds, 45 seconds, 60 seconds, and ON (the backlight is always on).
3.1.5 Auto Power Off Settings
The title bar displays 1-5, the main display area displays AUTOFF, short press Enter button to enter the auto power
off setting. It supports OFF (auto power off function is disabled), 15 minutes, 30 minutes, 45 minutes, 60 minutes, 90
minutes, and 120 minutes.
3.1.6 Filter
The title bar displays 1-6, the main display area displays FILT, short press Enter button to enter the filter mode
settings. OFF means to turn off the filter, 1Ord means to select the first-order filter mode, and 3~10 mean the average
filter.
Table 6 Filter settings