ADEEPT ADA031 - Page 54

www.adeept.com
50
Assemble the following components
Effect diagram after assembling
Install A16 and A17 as shown below.
Effect diagram after assembling
Assemble the following components
3. Fix one rocker arm of the servo to A17.
4. Assemble A16 and A17.
A17 x1
摇臂 x1
Self-tapping screw packaged
with servo x1
A16
A17
M2.5*7 Screw x1
M3 Lock
Nut x1
A16 x1
Do not tighten the M3 Lock Nut to ensure
that the A16 can rotate.