"Country" is your country code, do not modify it, the default is US; "ssid" needs
to be changed to the name of the WIFI you want to connect; "psk" needs to be
changed to the password of the WIFI you want to connect; other parts do not need to
do any modifications.
For example, our company's WIFI name is Adeept, WIFI password is 123456, and
the modified wpa_supplicant.conf file is as shown below:
(5) Save the set wpa_supplicant.conf file, and then copy it to the root directory of
the SD card of the Raspberry Pi system. As shown below:
To Next Page
Loading...
