9. Scene buttons (1-8):
Used when storing or playing back programmed scenes. Also used when backing
up data to a USB MEM Stick or through a ULink Cable.
10. LED-display:
The LED-display shows you relevant information depending on current operation.
11. Bank Up/Down button:
Used to select a scene bank or chase step.Also used to view files in memory stick.
19. Black-out button:
Used to bring all current output down to zero.
15. Music/Bkc button:
Used to engage audio mode for chase synchronization and to copy a bank of
scenes to another.
16. Midi/Rec button:
Used to record scenes and chase steps. Also used to setup Midi operation.
14. Program button :
Used to enter and exit Record mode when programming.
18. Tap/Disp button:
Used to tap sync chase playback and to change display view operation.
17. Auto/Del button :
Used to enter AUTO mode for automatic scene bank sequence or to delete a
scene or chase.
12. Fog-machine button:
Used to trigger fog machine which should be connected to rear of console.
13. Chase buttons (1-12):
Used when storing or playing back relevant chases.
5
DMX OPERATOR 384
To Next Page
Loading...
