22
MENU SUBMENU OPTIONS FUNCTIONS
DMX MODE
Address
d001~d512
DMX Address Setting
Channels
Ch06
6 DMX Channel Mode
Ch07
7 DMX Channel Mode
Ch08
8 DMX Channel Mode
Ch11
11 DMX Channel Mode
Ch12
12 DMX Channel Mode
No DMX mode
blAc
When the DMX signal is lost or interrupted, the unit will go into BLACKOUT mode.
LASt
When the DMX signal is lost or interrupted, the unit will hold at the LAST DMX setting.
ProG
When the DMX signal is lost or interrupted, the unit will run an auto program.
Delay mode
dr-0~dr-4
Select the unit delay mode
SECONDARY
Secondary Setting
SEcd
Designate the unit as a secondary unit in a primary-secondary setup.
DIMMER MODE
Red Dimmer
r.000~r.255
Adjust the intensity of the red color.
Green Dimmer
G.000~6.255
Adjust the intensity of the green color.
Blue Dimmer
b.000~6.255
Adjust the intensity of the blue color.
White Dimmer
U.000~U.255
Adjust the intensity of the white color.
Amber Dimmer
A.000~A.255
Adjust the intensity of the amber color.
UV Dimmer
u.000~u.255
Adjust the intensity of the UV color.
Flash Adjustment
f5.00~5o 1G
Adjust the ash speed. “00” is Off, “01” is the slowest speed, and “15” is the fastest.
SOUND MODE
Sound Active
so01~so1G
Select 1 of 16 sound active programs.
Sensitivity Adjust
sj-0~sj-8
Adjust the sound sensitivity. “0” is the lowest level, and “8” is the highest level.
AUTO RUN MODE
Color Fade Mode
AF01~AF16
Select 1 of 16 color fade modes.
Color Change Mode
AJ01~AJ16
Select 1 of 16 color change modes.
Color Change &
Color Fade Mode
A-JF
This mode will run both color change and color fade continuously.
Speed Adjustment
SP.01~SP.16
Adjust the running speed of the current mode.
STATIC COLOR
MODE
Color Select
CL00~CLG3
Select 1 of 63 static colors.
Flash Adjustment
f5.00~f5.15
Adjust the ash speed. “00” is Off, “01” is the slowest speed, and “15” is the fastest.
BATTERY LIFE
ENERGY SAVE
LOADING
SETUP
Battery Life Display
6---/
6000~b100
Displays the current battery life.“b---” means that the battery is not being used.“bXXX”
means that the battery is in use. “XXX” represents the battery charge percentage.“b000”
means that the battery has no charge.“b100” means that the battery is at full charge.
Energy Saving
Mode
65on
Activates energy saving mode.
b5oF
Deactivates energy saving mode.
Load On/Off Select
Loon
Activates battery power.
LooF
Deactivates battery power.
OTHER
Display
don
LED display is always on.
dooF
LED display turns off after 30 seconds.
IR Remote On/Off
iron
IR remote function is activated.
iroF
IR remote function is deactivated.
Display
Normal/Inverted
stnd
LED digital display is normal.
-3-
LED digital display is inverted.
Menu Lock
loC1
Deactivate display lock. (Display lock is not active)
LoC2
Activate display lock. (Press the MODE button for 3 seconds to unlock the display)
LoC3
Activate display lock two.(Press UP-DOWN-UP-DOWN to unlock the display)
Initialization Mode
dEFA
Default to factory settings.
WIFLY SETUP
WiFly Address
rC00~rC14
Set the WiFly address.
WiFly Function
On/Off
rCon
WiFly function is active
rCof
WiFly function is not active.
SYSTEM MENU
To Next Page
Loading...
