ADJ Products, LLC - www.adj.com - Mega Bar RGBA User Manual Page 8
Mega Bar RGBA Operating Instructions
5. When “A.XXX” is displayed you are in Amber dimming mode. Press the UP and
DOWN buttons to adjust intensity.
6. After you have adjusted the RGBA colors to make your desired color you can then
activate strobing by pressing the SET UP but- ton to enter the Flash (strobe) mode.
7. “FS.XX” will be displayed, this is Flash mode. The Flash can be adjusted between
“FS.00” (flash off) to “FS.99” (fastest flash).
Built-In Program Mode:
1. Plug the fixture in and press the MODE button until “Pr.XX” is dis- played. “XX”
represents a number from 1-22. Use the UP or DOWN buttons to scroll through the
22 programs. Programs 21 and 22 have adjustable colors. Once you have found your
desired program press the SET UP button.
2. Pressing the SET UP button will display “SP.XX”. When this is dis- played you can
adjust the running speed of your desired program. Use the UP or DOWN button to
adjust the speed between “SP.01” (slowest) and “SP.99” (fastest). Once you have set
your desired running speed, you can press the SET UP button to to enter the Fade
adjustment mode.
3. Pressing the SET UP button will display “Fd.XX”. When this is dis- played you can
adjust the fade speed of your desired program. Use the UP or DOWN button to adjust
the speed between “Fd.01” (fastest) and “Fd.99” (slowest) or “Fd.00” (Off). Once you
have set your desired fade speed, you can press the SET UP button to to enter the
Flash (Strobe) mode.
4. After pressing SET UP, “FS.XX” will be displayed, this is Flash mode. The Flash can
be adjusted between “FS.00” (flash off) to “FS.99” (fastest flash).
PROGRAMS 21 & 22:
If you have chosen programs 21 or 22, after the Flash mode, press the SET UP button.
“C1.XX” will be displayed. This is the base color, use the UP and DOWN buttons to scroll
through the 15 colors. Once you have chosen your base color, press the SET UP button
again so that“C2.XX” is displayed. This is the moving color, use the UP and DOWN
buttons to scroll through the 15 colors.
Sound Active Mode:
In this mode the Mega Bar RGBA will react to sound, and chase through the different
colors.
To Next Page
Loading...
