21
DISPLAY
CODE
FUNCTION DEFAULT VALUE
CD69 Overload time setting 60.0SEC
CD70 2nd stage overload time setting 20.0SEC
CD71 Auto voltage regulation (AVR) 0
CD72 Communication loss time 0.5SEC
CD73 Communication error counter 3
CD74 Address setting 1
CD75 Transmission speed 3
CD76 Transmission fault treatment 3
CD77 Reserved
CD78 Communicator protocol 4
CD79 Auto carrier frequency & boost setting 9
CD80
Power on start lock
(External terminal only)
0
CD81 MT output signal selection 0
CD82 MT output gain 100%
CD83 FT3 Multi-Function Terminal 3 1
CD84
FT2 Multi-Function Terminal 2
(Active mode setting)
1
CD85~CD90
Reserved
CD91 RUN terminal 0
CD92 ARR terminal 1
CD93 U.V.W open protection 1
CD94 Dead time compensation 0
CD95 Reserved
CD98~CD99
Reserved
To Next Page
Loading...
