Adleepower AP4G3 - Page 48

46
Auto running mode
CD58
Setting Range 0 ~ 4
Factory Setting 0
SPEED 1
th
2
th
3
th
4
th
5
th
VALUE
RANGE
UNIT
SPEED SETTING CD47 CD48 CD49 CD50 CD00 0 ~ 400 Hz
TIMER SETTING CD59 CD60 CD61 CD62 CD63 0 ~ 15.00 hr.min
CD12=0, use keypad to control timer
CD12=0 and CD13=2, use RS485 to control timer
CD42 or CD43=10, use FT1 or FT2 terminal to control timer
Value Description
0 Timer disable
1 Speeds with timer for one cycle then stop
2 Speeds with timer for running continually until receive stop command
3
Speeds with timer for one cycle then stop. There is a stop between each
speed.
4
Speeds with timer for running continually until receive stop command.
There is a stop between each speed.
FT1/FT2 “ON”, for timer RUN.
FT1/FT2 “OFF”, for timer STOP.
FT1/FT2
Timer