B. Operation errors
80
ENTER
Power device failure 3
Power device failure during
deceleration (stopping).
PF03
Power device failure 4
Power device failure during stand-by.
PF04
Parameter Locked
To change the contents of
CD02~CD52 set CD01=press
first.
OPE1
FWD or REV only
Motor direction limiter.
See functions description CD08.
OPE2
Analog signal input only
Motor speed command from control
terminal only.
Input analog signal by Frequency
knob.
See functions description CD10.
OPE3
Terminal command only
Accept run command from control
terminal only.
Not operation panel.
See functions description CD12.
OPE4
To Next Page
Loading...
