101
USING ADOBE CAPTIVATE 5
Noninteractive Objects and Media
Last updated 4/22/2010
Fade In [#] Seconds Specifies the time for the audio to fade in to full volume.
Fade Out [#] Seconds Specifies the time for the audio to fade out to silence.
Fix size and position of noninteractive objects
To specify the exact size and position of the object, in the Properties Inspector (Window > Properties), specify the
values in the Position & Size area. Using these options instead of dragging the object helps you create consistent objects
throughout your project.
X Specifies the position of the X cordinate of the object, in pixels.
Y Specifies the position of the Y cordinate of the object, in pixels.
Width Specifies the horizontal width of the object, in pixels.
Height Specifies the vertical height of the object, in pixels.
Constrain Proportions Maintains the height-to-width ratio of the object. If either the height or width of the object is
changed, the other dimension is changed to maintain the relative proportion of the object.
To Next Page
Loading...