ADT 7100 - Page 12

ADT 7100 User Manual Operating Procedure
2.4 VIDEOS
The following videos show the right way of working on the ADT. You can access them from the ADT
wiki page or scan the following QR codes.
How to properly mount a sample onto the
dicing tape: Link
How to correctly assemble a flange into a
hubless blade: Link
How to properly disassemble the flange from
a hubless blade: Link
How to properly load a blade into the ADT
system: Link
How to properly unload a blade from the
ADT system: Link
Lurie Nanofabrication Facility 2-4