To Next Page

To Previous Page



ADTHDIndoorCamera

QuickInstallationGuide

ADTControl

Enrollment

FCCID:P27RC845





RC845 Indoor Full HD Camera Installation Guide

3 ADT Control Enrollment

This section provides instructions for wirelessly enrolling the RC845 Indoor HD

Camera onto the ADT Control platform. This process uses the Soft AP method

to wirelessly connect the HD Camera to the Customer’s network.

UsingSoftAPtoEnrollCamera

1. Set up the camera as described in the previous section.

2. Connect the camera’s AC power adapter and plug it into a power

outlet.

3. Wait for the power LED to blink green/amber.

4. Connect to the camera’s network SSID using a laptop or mobile device.

The SSID is the model number of the camera and part of the MAC

address. For example, SSID = RC845 (XX:XX:XX).



5. Open a web browser (IE, Chrome, Firefox, etc.). Type in adtinstall.com

and you will be directed to the install wizard page.

6. Choose a language.



7. Click Scan for Network SSID and select the Customer’s router SSID.



Questions and Answers:

Need help?

Do you have a question about the ADT RC845 and is the answer not in the manual?

ADT RC845 Specifications

General