ADT RC845 User Manual


ADTHDIndoorCamera
QuickInstallationGuide
AppendixA
FCCID:P27RC845


22
RC845 Indoor Full HD Camera Installation Guide
AppendixA
Technical Specifications
Dimensions W x H x D
2.56” x 2.56” x 1.32” (65mm x 65mm x 33.5mm),
without stand
Operating Temperature
Temp: 32°F to 104°F (0°C to 40°C);
Humidity: 0% to 85% RH (non-condensing)
Storage Temp.
Temp: -4°F to 158°F (-20°C to 70°C);
Humidity: 0% to 90% RH (non-condensing)
Video Compression H.264 and MJPEG
Image Resolution
16:9 720p (1280x720); 4:3 XGA (1024x768);
VGA (640x480); QVGA (320x240);
Mixed Mode (720p, VGA, QVGA)
Network Protocol
TCP/IP, HTTP, HTTPS, DHCP, UPnP, NTP,
RTCP, DNS
Network Interface 1 RJ-45 USB connector for Ethernet (optional)
Wireless Interface
IEEE IEEE 802.11ac/ 802.11n/802.11b/802.11g
compatible, WEP 64/128 bit, WPA/WPA2
personal security support
Button 1, WPS/Network
LEDs 2, Power and Network/WPS
IR LEDs 2
Power Adapter 12VDC/1A, 100 to 240VAC
Regulatory Approvals
FCC Statement (US)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.

ADT RC845 Specifications

General

Brand	ADT
Model	RC845
Category	Security Camera
Language	English