Adtech ADTECH9 Series Programming Manual

Basic Information
This Manual is written by Adtech (Shenzhen) Technology Co., Ltd.
This Manual is mainly written by Tang Xiaobing, Yao Lei and Xu Yuwen.
This manual was typeseted on July 21, 2018, and the project number is applicable for all the machine control
projects of CNC9 series.
Copyright
Adtech (Shenzhen) Technology Co., Ltd. (Adtech hereafter) is in possession of the copyright of this manual.
Without the permission of Adtech, the imitation, copy, transcription and translation by any organization or
individual are prohibited. This manual doesn’t contain any assurance, stance or implication in any form.
Adtech and the employees are not responsible for any direct or indirect data disclosure, profits loss or cause
termination caused by this manual or any information about mentioned products in this manual. In addition,
the products and data in this manual are subject to changes without prior notice.
All rights reserved.
Adtech (Shenzhen) Technology Co., Ltd.

Adtech ADTECH9 Series Specifications

General

Brand	Adtech
Model	ADTECH9 Series
Category	Control Systems
Language	English