ADTRAN 600 Series User Manual

Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B
Page 51
© 2002, ADTRAN, Inc. Total Access 600 Series User Manual
Managing the Modules – V.35 Setup
Use the 96
(783
menu to view and set the parameters shown in Figure 18.
Figure 18. V.35 Setup Menu
&
+$11(/
5
$7(
and (,$ settings are supported via this menu option. For all typical applications, these settings are
left in their default states.
>ATM/FR IWF
This menu contains the setup and status for the ATM/Frame Relay interworking functions.
Mode
The 0
2'(
setting configures the V.35 port for FRF5 or FRF8 operation, depending upon the application
being supported.
FRF5
This is also known as Network Interworking. Use this mode for Frame Relay over ATM.
FRF8
This is also known as Service Interworking. In this mode, the Total Access 600 performs a translation
between Frame Relay and ATM protocols.
Configuration
The &
21),*85$7,21
menu is used to support the configuration of Frame-to-ATM interworking, signaling
formats, timeout values, and PVC settings.

ADTRAN 600 Series Specifications

General

Brand	ADTRAN
Model	600 Series
Category	Switch
Language	English