Advanced Diagnostics BRAVO III - 5.4 Description of work station; 5.5 Graphics; 5.6 Separate parts; 5.7 Connection to the mains

To Next Page

To Previous Page

Operating manual - English BRAVO III with EZ-Jaw

4 ACCESSORIES PROVIDED

To ensure trouble-free working with the BRAVO III with EZ-Jaw, it is advisable to always have certain

spare parts on hand. It is good policy to have a replacement CUTTER, BRUSH and BELT in the tool

box.

BRAVO III with EZ-Jaw is supplied with a full range of accessories.

The accessories provided by Silca are all that is necessary to carry out the operations for which the

machine is designed.

code D401224ZZ

STEEL PIN

1.20 mm

2 pcs.

code D400754BA

CUTTER LOCKING PIN

1 pcs.

code D300783ZZ

19 mm SPANNER

1 pcs.

code D402302BA

STEEL BAR

2 pcs.

code D402301BA

STEEL BAR WITH NECK

2 pcs.

code D401561BA

ADJUSTING BAR

2 pcs.

code D401225ZZ

STEEL PIN

1.70 mm

2 pcs.

FUSE (5 pcs.)

code D306748ZZ

6,3 AMPS rapid

code D401198ZZ

POUCH

1 pcs.

code D300221ZZ

ALLEN WRENCH 2 mm

1 pcs.

code D300222ZZ

ALLEN WRENCH 2,5 mm

1 pcs.

code D300223ZZ

ALLEN WRENCH 3 mm

1 pcs.

code D300224ZZ

ALLEN WRENCH 4 mm

1 pcs.

code D300225ZZ

ALLEN WRENCH 5 mm

1 pcs.

code D300308ZZ

10 mm SPANNER

1 pcs.

Main Page

Advanced Diagnostics BRAVO III - 5.4 Description of work station; 5.5 Graphics; 5.6 Separate parts; 5.7 Connection to the mains

Table of Contents