WP-T800 1 Station Thermal Line Printer
- 13 -
5.2 Switch Operation (Combined Switch operation)
(1) SELF PRINT TEST
Feed + POWER ON (Turn the power on
while holding the Feed button depressed,
the buzzer gives one short beep.)
Self-testing will be performed according to
the VER. NO., printer settings and
characters etc (Ref. sheet1). When the
Feed button is held again after self-printing
stopped, the printer will print out again. To
turn off this mode, it is necessary to turn off
the printer power completely.
To Next Page
Loading...
