Advantech Adam 4000 Series - Page 127

Chapter 4 Command Set 4-43
Chapter 4
Command
Syntax
Command Name Command Description I/O Module
$AA0Ci
Single Channel
Span Calibration
Calibrates a specified channel to correct
for gain errors
4015, 4019
$AA1Ci
Single Channel
Offset Calibration
Calibrates a specified channel to correct
for offset errors
4015, 4019
$AA7CiRrr
Single Channel
Range
Configuration
Configure the input type and range of
the specified channel in an analog input
module
4015, 4019
$AA8Ci
Read Single
Channel Range
Configuration
Gettheinputtypeandrangeofthe
specified channel in an analog input
module
4015, 4019
$AAXnnnn
Watchdog Timer
Setting
Set WDT communication cycle
4015, 4019
$AAY
Read Watchdog
Timer Setting
Read the setting of WDT
communication cycle
4015, 4019
$AAS0
Internal
Calibration
Internal self-calibration for offset and
gain errors
4015
$AAS1
Reload default
calibrating
parameter
Reload factory default calibrating
parameter to overwrite current
calibrating parameter
4015
$AA9SNNNN
CJC Offset
Calibration
Calibrates the CJC sensor for offset
errors
4019
$AAAi CJC Setting Configure CJC setting
4019