Advantech Adam 4000 Series User Manual

4-52 ADAM 4000 Series User's Manual
#AA
Name Analog Data In
Description The command will return the input value from a specified (AA)
module in the currently configured data format.
Syntax #AA(cr)
# is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address of an analog input module.
(cr) is the terminating character, carriage return (0Dh).
Response >(data)(cr)
There is no response if the module detects a syntax error or
communication error or if the specified address does not exist.
> is a delimiter character.
(data) is the input value in the configured data format of the
interrogated module. (For data formats, see Appendix B).
(cr) is the terminating character, carriage return (0Dh).
Example command: #33(cr)
response: >+5.8222(cr)
The command interrogates the analog input module at address
33h for its input value.
The analog input module responds with +5.8222 volts. (The
configured data format of the analog input module in this case
is engineering units.)
Example command: #21(cr)
response: +7.2111+7.2567+7.3125+7.1000
+7.4712+7.2555+7.1234+7.5678 (cr)
The command interrogates the analog input module at address
21h for its input values of all channels.
The analog input module responds with channels from 0 to 7
with +7.2111 volts, +7.2567 volts, +7.3125 volts,
+7.1000 volts, +7.4712 volts, +7.2555 volts, +7.1234 volts and
+7.5678 volts.
4011, 4011D, 4012, 4013, 4015, 4016,
4017, 4017+, 4018, 4018+, 4019

Advantech Adam 4000 Series Specifications

General

Brand	Advantech
Model	Adam 4000 Series
Category	Control Unit
Language	English