Advantech Adam 4000 Series User Manual

Chapter 4 Command Set 4-123
Chapter 4
4016
$AAS
Example command: $0AS(cr)
response: !0A(cr)
Presume the present output value of the output channel of the
strain gauge input module with address 0A is +05.000V. The
command tells the module store the present output value, in its
non-volatile memory. When the module is powered up or reset,
its default output value will be +05.000V.
The response of the strain gauge input module indicates that
the command has been received.

Advantech Adam 4000 Series Specifications

General

Brand	Advantech
Model	Adam 4000 Series
Category	Control Unit
Language	English