Advantech Adam 4000 Series User Manual

Chapter 4 Command Set 4-205
Chapter 4
4080
@AAEAN
Name Enable Alarm
Description Enable Alarm for the specified counter
Syntax @AAEAN (cr)
@ is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address of a counter module.
EAN represents the Enable Alarm for counter command.
N = 0 Represents counter 0
N = 1 Represents counter 1
(cr) is the terminating character, carriage return (0Dh).
Response !AA(cr) if the command is valid.
There is no response if the module detects a syntax error or
communication error or if the specified address does not exist.
! is a delimiter character indicating a command was valid.
AA (range 00-FF) represents the 2-character hexadecimal
address of a counter module.
(cr) is the terminating character, carriage return (0Dh).
Example command: @12EA0(cr)
response: !12(cr)
The command sets the Alarm Status as ‘Enable’ for counter 0 of
the counter module at address 12h. It means that the digital
output will be triggered while the count value of the counter 0
reaches the alarm limit value. The addressed module replies
that the command has been received.

Advantech Adam 4000 Series Specifications

General

Brand	Advantech
Model	Adam 4000 Series
Category	Control Unit
Language	English