Advantech Adam 4000 Series User Manual

Calibration
5-4 ADAM 4000 Series User's Manual
6. Only for ADAM 4011, 4011D, 4018, 4018+, 4018M
Execute the CJC (cold junction sensor) calibration command. This is also
done with the ADAM utility software. (See “CJC Calibration” option in
the Calibration sub-menu of the ADAM utility software).
Figure 5-4 Cold Junction Calibration

Advantech Adam 4000 Series Specifications

General

Brand	Advantech
Model	Adam 4000 Series
Category	Control Unit
Language	English