AIMB-275 User Manual 34
3.1 Introduction
With the AMI BIOS Setup program, you can modify BIOS settings and control the
special features of your computer. The Setup program uses a number of menus for
making changes and turning special features on or off. This chapter describes the
basic navigation of the AIMB-275 setup screens.
3.2
BIOS Setup
The AIMB-275 Series system has AMI BIOS built in, with a CMOS SETUP utility that
allows users to configure required settings or to activate certain system features.The
CMOS SETUP saves the configuration in the CMOS RAM of the motherboard. When
the power is turned off, the battery on the board supplies the necessary power to pre-
serve the CMOS RAM.When the power is turned on, press the <Del> button during
the BIOS POST (Power-On Self Test) to access the CMOS SETUP screen.
3.2.1
Main Menu
Press <Del> to enter AMI BIOS CMOS Setup Utility, the Main Menu will appear on
the screen. Use arrow keys to select among the items and press <Enter> to accept or
enter the sub-menu.
Control Keys
< ↑>< ↓>< ←>< →>
Move to select item
<Enter> Select Item
<Esc> Exit
<Page Up/+> Increase the numeric value or make changes
<Page Down/-> Decrease the numeric value or make changes
<F1> General help
<F2> Previous Values
<F3> Optimized Defaults
<F4> Save & Exit
To Next Page
Loading...
Need help?
General
