- 21 -
camera will detect the subject brightness and use the
flash only when required.
Always on
Flash fires every time you take a photo, regardless of
lighting conditions.
Slow sync Flash fires with a slow shutter speed.
Always off The flash never fires even in dark situation.
3. Shoot the image.
Using the Self-timer & Burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is
shot. Use the burst to record four continuous
still images shooting.
1. Set the camera to the Record mode (see page 14).
y This function only used in still image shooting.
2. Press the button to change the settings:
Display Option Description
- Single shot Record a single image.
2-SEC The shutter release will be delay for 2 seconds.
10-SEC The shutter release will be delay for 10 seconds.
Double
Record two images in a shot after pressing the shutter
release button 10 and 12 seconds.
Burst For capturing 4 images in succession.
3. Shoot the image.
NOTE:
y The flash charging time may increase when the battery is low.