- 36 -
1. Set the camera to the Setup Menu (see page 17).
2. Press or to select LANGUAGE ( ) then press
or the SET button to launch the submenu.
3. Press or to select a language and press or the
SET button to apply the setting.
4. Press the MENU button to close the menu.
Resetting the File Numbers
Use this function if the camera experiences a “Folder cannot be created” error or if you want to
restart numbering, for example, after erasing all files. For detail operation, see page 17.
Resetting the file number is useful for avoiding the file name duplication when images are
downloaded to a computer.
Option Description
Series
Store the latest used file number no matter deleting files
or inserting a new memory card.
Reset
Reset file numbering each time the memory card is
changed.
About the Folder & File Name
The digital camera automatically creates a directory of folders in the internal memory or memory
card that it uses to organize still images, movie clips and other information.
Folder Structure
Folder name begins with a 3-digit number from 100
to 999 and followed by “DICAM”, each folder holds
up to 9999 files. If new files are made, a new folder
named in sequence will be made automatically.
File Naming
File name begins with “DSCI” and are followed by a 4-digit number that increases in sequence.
File numbering starts from 0001 when a new folder is created.
If the highest folder number is 999 and highest file number exceeds 9999, the camera will display
the warning message “Folder cannot be created”. When it appears, try one of the following ways:
y Reset the file number and plug in a new memory card, see page 40.
To Next Page
Loading...
Need help?
General
