- 29 -
Playing Back Sounds
1. Set the camera to the Playback mode (see page 14).
2. Press or to select the audio clip that you want to playback.
3. Press the SET button to start playing the audio clip.
4. Press the MENU button to stop the audio clip, or press the SET button to pause it.
y When audio clip paused, press the SET button again to resume.
Recording a Voice Memo
You can add a voice memo to the still images after you record it.
1. Set the camera to the Playback mode (see page 14).
2. Press or to select a still image that you want to
add a voice memo.
3. Press the MENU button, using or to select VOICE
MEMO ( ) and press the SET button.
y If the image already has the voice memo recorded, the appears on the LCD monitor.
The new recording will replace the previous one.
4. Press the SET button to start recording for 30 seconds, or press the MENU button to cancel it.
5. Allow a short pause at the end of the voice message before pressing the SET button again to
end the recording.
Playing Back a Voice Memo
NOTE:
y The voice memo cannot be added to a movie clip or a protected image.
y You cannot delete only the voice memo. When you delete the image, the attached voice
memo is also deleted.
To Next Page
Loading...
Need help?
General
