AEE magicam s50 - Setting Date and Time

13
aee.com
Setting the date and time
Set time and date by following these steps:
1 Turn on S50 to enter recording standby mode;
2 Press "M" button to enter the camera setting menu;
3 Press "<" / ">" button to select " ";
4 Press "-" / "+" button to select time setting option and press "OK"
button to conrm;
5 Press "<" / ">" button to move the cursor to the time or date to be
modied. Then press "-" or "+" button to modify the time and date
and press "OK" to conrm;
6 Press "M" button to exit the menu and return to recording
standby mode.
Use "<" / ">" button to select the item to the left / right, and use "+" /
"-" button to select the item above/below of the selected item. After
selection, press "OK" button to conrm operation.
Note: Please ensure that the date and time are correctly set. This
unit will add time to the photo/video based on this setting.
Date/
Time