Photo shooting
Operating procedure for photo shooting
1. Turn on S50 to enter recording standby mode;
2. Cast the lens to the subject and preview it on the display;
3. Press the "Shutter" button once to switch the working mode to
"photo shooting";
4. Press the "Shutter" button again to shoot one photo.
• The green indicator will ash once;
• The speaker will click to indicate completion and the system will
return to photo shooting standby mode.
• TFT display under photo shooting mode is shown as below:
8 M
Battery level
Working mode
(photo shooting)
Resolution for
photo shooting
avaliable space
of TF card
• During photo shooting, LCD segment display is shown as below:
To Next Page
Loading...
