15
Inserting the Shelf and Universal Baking Tray
3 Anti-tip device
All slide-in units have a small bulge on the left and right. This bulge is
an anti-tip device and must always point to the rear of the oven.
Tray or universal baking tray:
The anti-tip device must point to-
wards the rear of the oven.
Inserting shelf:
Insert the shelf unit with both guide
rails pointing upwards. The anti-tip
device must point downwards and
be positioned to the rear of the
oven compartment.
Inserting shelf and tray:
When the shelf unit and universal
baking tray are used together, care-
fully place the shelf anti-tip device
in the bulges on the tray.
To Next Page
Loading...
