44
Pyrolytic cleaning
1 Danger! The oven becomes very hot during this process. Keep small
children away.
1 Warning! Before carrying out the pyrolytic cleaning process, all remov-
able parts, with the exception of the side rails, must be removed from
the oven.
3 If you use the oven shelf runners that are available as special accesso-
ries, these must be removed before pyrolytic cleaning.
1. First remove the worst of the residue manually.
2. Set the oven function switch to Pyroluxe P.
3. Turn the temperature selection switch all the way to the right. Pyrolytic
cleaning begins after a few seconds and turns itself off again automat-
ically after 2 hours 30 minutes.
3 During pyroluxe the door is locked and the oven lighting is non-opera-
tional. The temperature pilot light remains illuminated until the door is
unlocked again (approx. 45 mins.)
4. After pyrolytic cleaning is finished, turn all control knobs to the 0 posi-
tion.
5. When the oven has cooled down, wipe it out with a soft damp sponge
or cloth.
To Next Page
Loading...
