17
Turnspit
Attaching the food to be grilled
1. Place one fork on the turnspit.
2. Add the food to be grilled followed
by the second fork
3 Make sure the food is in the middle
of the spit.
3. Tighten the forks using the screws.
Inserting the turnspit
1. Insert the general purpose tray in
the first shelf position from the
bottom.
2. Insert the turnspit support at the
front on the right-hand side in the
third shelf position from the bot-
tom.
3. Place the handle on the spit and
press the clip down.
3 The clip must be kept pressed down to keep the handle secure on the
turnspit.
4. Push the point of the turnspit into the drive at the left-hand side of the
back wall of the oven until it snaps in.
5. Place the groove in front of the handle on the notch provided on the
turnspit support.
6. Remove the handle.
7. Set oven function and temperature
as given in the Turnspit Table.
3 Make sure that the turnspit turns.
To Next Page
Loading...
