EasyManua.ls Logo

AEG COMPETENCE B4142-1 - What to Do if

AEG COMPETENCE B4142-1
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
What to do if ...
If you cannot rectify the fault with the help of the information given
above, please contact your local Service Force Centre.
1 Warning: Repairs to the appliance may only be carried out by qualified
specialists. Improper repairs can give rise to significant hazards for the
user.
If the appliance has been used improperly, the customer service engi-
neer's visit or that of the specialist dealer will not be free of charge,
even during the warranty period.
3 Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the
oven door during (or just after) baking or roasting may cause the glass
to steam up.
Symptom Possible cause Solution
The oven does not heat
up.
The oven has not been
switched on.
Switch on the oven.
The time has not been set. Set the time.
The necessary settings have
not been made.
Check the settings.
The oven safety cut-out has
been activated.
See
Safety Cut-out.
The circuit breaker (at the
household fuse box) has
tripped or the fuse has
blown.
Check the fuse.
If the circuit breaker trips or
the fuse blows several times,
please call an approved elec-
trician.
Pyroluxe is not func-
tioning.
The oven shelf runner has
not been removed.
Remove oven shelf runner.
The oven door is locked The appliance is not plugged
in; The door lock has been
activated.
Plug in the appliance and
wait at least 10 seconds until
the red temperature pilot
light goes off.
The oven lighting does
not come on.
The oven light bulb has
blown.
Replace the light bulb in the
oven.

Other manuals for AEG COMPETENCE B4142-1

Related product manuals