EasyManua.ls Logo

AEG COMPETENCE E4100-1 - Installation Instructions; Important: The new appliance is only to be installed and connected up by an approved installer.; Safety Instructions for the Installer

AEG COMPETENCE E4100-1
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Instructions
54
Installation Instructions
1
Important: The new appliance is only to be installed and connected up
by an approved installer.
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
1 Safety Instructions for the Installer
A device must be provided in the electrical installation which allows
the appliance to be disconnected from the mains at all poles with a
contact opening width of at least 3mm.
Suitable isolation devices are e.g. circuit breakers, fuses (screw-type
fuses are to be removed from the holder), earth leakage trips and
contactors.
Anti-shock protection must be guaranteed by the installation.
The unit in which the appliance is fitted must satisfy the require-
ments of DIN 68930 in respect of stability.
Built-in ovens and cooking surfaces are fitted with special connector
systems. They may only be combined with appliances with a matching
system.

Other manuals for AEG COMPETENCE E4100-1

Related product manuals