AEG protect d. 3000 - Page 43

43
EN
The display indicates the current UPS status in the top middle
section. Here is a list of the symbols used and what they mean:
Display
Status
UPS is in normal / continuous
double-conversion mode.
Power supply is available
and within the acceptable
tolerance range
(Mode: “High performance”).
UPS is in battery mode.
UPS supplies the load
via the integrated bypass.
UPS is operating in
frequency converter mode.
UPS is in standby mode.
1 8 m i n
Input Output
6
1 8 m i n
1 8 m i n
Input Output
1 8 m i n
Input Output
1 8 m i n
Input Output
Input Output