66
Yellow
On The UPS is on Bypass mode.
Red
On
The UPS has an active alarm or fault. See
troubleshooting for additional information.
The following table shows the buttons and description:
Button Function
Illustration
Power
on
Press the Button for >100ms & < 1s can
power on the UPS without utility input at
the condition of battery connected
Turn on
When the Unity is powered on, press the
button for >1s can turn on the UPS
Turn off Press the button > 3s can turn off the UPS
Scroll up Press to Scroll up the menu option
Scroll
down
Press to Scroll down the menu option
Enter
menu
Select/Confirm the current selection
Exit the
present
menu
Press to exit present menu to Main menu or
the higher-level menu without changing a
setting
Mute
buzzer
Press the button to mute the buzzer
temporarily, once new warning or fault is
active, buzzer will work again
To Next Page
Loading...
