EasyManua.ls Logo

AEG Voxtel Smart 3 - Connecting Handset to Computer

AEG Voxtel Smart 3
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connect your handset to a computer
73
29 Connect your handset to a computer
You can transfer you pictures, videos, music, ringtones and application from your
computer to either the Micro-SD card or Internal Phone Memory.
WARNING
When connecting your phone to a computer and mounting its SD card, you must follow
your computer’s instructions for connecting and disconnecting USB devices to avoid
damaging or corrupting the files on your SD card.
1 Connect one end of the Micro-USB cable to the handset and the other end to the USB
port on your Computer.
- A pop up window appears on the screen.
- If the window did not appear, drag down the status bar and then tap USB Connected.
2 Tap Turn on USB Storage.
- After a few seconds, USB storage in use appears.
3 On My Computer windows, a new device NANDStorage is displayed. This is the
internal Phone memory.
- You can store data in the Android folder of NANDStorage.
- If a Micro-SD card is inserted into the handset, you will find another device
Removable Disk in My Computer windows.
4 After you have finished the data transfer/access, tap Turn off USB storage on the
handset to disconnect.

Table of Contents