Aeotec MultiSensor 7 - Button Functions; 1 x Tap (Factory Reset)

22/07/2021
MultiSensor 7 user guide : Aeotec Help Desk
https://aeotec.freshdesk.com/support/solutions/articles/6000232605-multisensor-7-user-guide
2/8
MultiSensor 7 diagram:
Button Functions.
Action button press LED Status Function
1x Tap (when factory reset) Solid Yellow
Pair Mode
Enters Z-Wave pair mode, flashes white/green 4 times
within 2 seconds upon success.