Ensure ceiling joists are sound and of adequate size and strength to support a 35Kg (77lbs) load.
To reduce the risk of fire, electrical shock or personal injury, ensure that the fan mounting
bracket is supported directly from the building structure. DO NOT mount to an outlet box.
The mounting bracket must be firmly screwed to a load bearing structure e.g. a concrete ceiling, steel
structure or timber frame. If a timber frame is to be added it must be securely nailed or screwed
between two beams. Mounting boxes must be embedded in concrete or other load bearing material.
Mechanical issues
Do not remove the fan from the ceiling after installation.
Do not attach the Fan Assembly before the Fan Motor Housing is installed and secured. To protect the
finish, the Fan Motor Housing should be kept in the carton until ready to be installed.
After the fan is completely installed, check to make sure that all connections are secure to prevent the
fan from falling and/or causing damage or injury.
To reduce the risk of personal injury, do not bend or damage the motor Drive Shaft or Fan Assembly
when handling or installing
Aeratron fans are equipped with a self-balancing system and do not require manual balancing!
Electrical issues
! Means for disconnection must be incorporated in the fixed wiring in accordance with national wiring
rules!
We highly recommend installing the fan with an on/off switch so that the current to the fan receiver
can be turned off by this switch.
The fan can be used with a wall control and in conjunction with most home automation systems.
Extra electronics are required; please contact your fan supplier for further information.
To avoid possible electric shock during installation, be sure electricity is turned off at the main power
box before commencing work. Disconnect power by removing fuse or turning off circuit breaker
before installing the fan. Ensure all spliced connections are adequately insulated.
Note:
Nothing in this manual is intended to instruct or assist untrained or unqualified persons to install this
product. Additionally, it is the responsibility of the installer and user to apply common sense and care
at all times.
To Next Page
Loading...
