STEP 1 Mounting Hanger Bracket to Ceiling
supply at the main power box. Disconnect power
by removing fuse or turning off circuit breaker.
!
hanger
provided. Ensure ceiling joists are sound and of adequate size and strength to support a 32kg (70lbs) load. If a
between two beams.Proper care must be
and stronger screws.
Ceiling Joist
OPTION A:
OPTION B:
Embedded
STEP 2
Connecting Mains Power to Terminal Block
4
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT.
N
L
CONNECT WITH RECEIVER
3PIN
NEUTRAL
LIVE
L
LIVE
LIVE
GROUND
GREEN
BROWN
L
BLUE
N
FROM HOUSE
(Mains Power)
To Next Page
Loading...
