Aercus WeatherRanger - Set Date and Time

Aercus Instruments™ - WeatherRanger® 26 | P a g e
4.3.1 Set Date and Time
Set the date and time. Set automatic time synchronisation.
1. Set Time. (hour:minute:second) Press to set the time. The hour field will turn red. Press
or to select hour, minute or second. Press or to increase or decrease
the value.
2. Set Date. (month:day:year) Press to set the date. The month field will turn red. Press
or to select month, day or year. Press or to increase or decrease the
value.
3. Set Time Zone. Press to set the time zone. Press to increase the time zone and
to decrease the time zone. With time zone highlighted, press to set Daylight
Savings Time (DST). Press to toggle ON or OFF. Note: the DST should be always
checked to automatically update the time when DST changes.
4. Set Time Server. The default time server is time.nist.gov. Press to set the time
server. Press again to turn ON. Press to toggle ON or OFF. Press to
highlight Update and to immediately update.
Note: The time server will not work until the WiFi connection has been set up.