EasyManua.ls Logo

AERMEC RePuro 650 - Main Components; Component Description

AERMEC RePuro 650
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
IREPPY - 1404 - 4238051_01
FRAMEWORK - STRUCTURE
• HEAT EXCHANGER
• FAN ASSEMBLY
• FILTER SECTION
• CONDENSATE DRAIN TRAY
• PLASMACLUSTER FILTER
• FREE COOLING DAMPER
• BYPASS DAMPER
• ELECTRIC PRE-HEATER (only for RePuro
R)
• ELECTRICAL CONNECTIONS
• WIRED CONTROL PANEL
• FRAMEWORK - STRUCTURE
Self supporting panels in galvanised sheet
steel with internal insulation.
The unit is protected against frost in cli-
mates with temperatures down to -10°C.
Suitable for wall or ceiling mounng (Re-
Puro 100-170)
Suitable for wall mounng with standard
supplied plate and oor mounng with
dedicated accessories (RePuro 250-350-
450-550-650).
Steel flanges for connection to air ducts.
• HEAT EXCHANGER
High efficiency heat exchanger even
exceeding 90% (EN 308), of hexagonal
shape to increase the heat exchange area.
Easily removed for cleaning or replace-
ment.
• FAN ASSEMBLY
Centrifugal fans directly coupled to high
efficiency EC “Brushless” motors with var-
iable speed (ErP2015).
Control of nominal air flow in 20 steps
from 0 to 100%.
Anti-freeze by air flow modulation: during
winter operation the heat recovery unit
modulates the air flow supplied to the
room to prevent the formation of frost on
the heat exchanger with extended operat-
ing limit down to -10 °C external air tem-
perature. The air flow modulation is linked
to the external air sensor.
• FILTER SECTION
Filter removable for cleaning or replace-
ment.
Standard filter G2 efficiency class on the
extract air.
Standard filter G4 efficiency class on the
supply air.
Possibility to replace the standard G4 effi-
ciency filter with a F7 efficiency class filter
(accessory).
• CONDENSATE DRAIN TRAY
Drain tray supplied with outlets for con-
nection to the condensate drainage sys-
tem.
• PLASMACLUSTER FILTER
Ioniser filter PLASMACLUSTER as stand-
ard.
(See the dedicated section for further de-
tails)
• BYPASS FREE COOLING DAMPER
Standard for RePuro 250-350-450-550-
650.
Automatic bypass for operation in Free
cooling during mid-season.
If the space temperature is greater than
the setpoint (Tset ambient), and the ex-
ternal air temperature (Ta.e.) is below this
value, the heat recovery unit achieves the
desired condition by supplying the exter-
nal air without any heat recovery (bypass
free cooling).
• BYPASS ANTI-FREEZE DAMPER
Standard for RePuro 450-550-650
In the heat recovery units Repuro 450
- 550 and 650 there is the bypass anti-
freeze section.
This systems allows internal mixing of
some of the room return air with the ex-
ternal air supply air flow.
This function is active when the external
air temperature is below 10°C and greater
than 0°C.
To ensure the flow of warm air across the
damper the system modulates the extract
fan air flow.
• ELECTRIC PRE-HEATER (only for per
RePuro_R)
Standard for RePuro 250R-350R-450R-
550R-650R.
The heat recovery units RePuro_R include
and electric element pre-heater and can
integrate the anti-freeze operation by air
flow modulation with the activation of the
electric heater in relation to the external
air temperature.
The pre-heater element can only be ena-
bled during the AUX operating mode (see
the user manual for further details).
With the electric pre-heater element
to operating range is extended down to
-15°C.
• ELECTRICAL CONNECTIONS
Microprocessor control board that can be
interfaced with the VMF system complete
with:
- power supply cable 2m long with plug,
- connector for the control panel,
- terminal block for RS485 connecon.
- terminal block for TTL connecon,
- terminal block for connecon to remote
contact and window contact,
- terminal block for connecon to the wa-
ter temperature sensor, external air tem-
perature sensor, and supply air tempera-
ture sensor.
• WIRED CONTROL PANEL
Control of the unit with a wired control
panel of innovative design, extremely
slim, allowing the control of functions
with a capacitive touch keypad and with
LCD display.
After a power failure the unit restarts
with the settings already programmed on
the wired panel.
Activation of the electric element in the
versions RePuro_R.
Front panel of light grey colour PANTONE
COOL GRAY 1C.
Standard supplied cable of 6 metres
length.
7. MAIN COMPONENTS
7.1. COMPONENT DESCRIPTION

Other manuals for AERMEC RePuro 650

Related product manuals